Oct 17, 2023 Ostavi poruku

info-750-569







1. Improved Tool Life – One of the biggest advantages of using internal coolant holes in drilling is that it can significantly extend the life of the tool. By keeping the temperature of the cutting zone low, coolant helps to reduce tool wear, preventing damage to the tool's cutting edge and prolonging its life.

2. Enhanced Surface Quality – When drill bits are cooled with coolant, the heat is removed from the cutting zone and transferred to the chips, thereby reducing the thermal damage to the workpiece. Additionally, coolant can also reduce friction between the drill and the workpiece, resulting in a smoother finish.

3. Increased Machining Speeds – With internal coolant holes, machining speeds can be increased as the tool is kept cooler and can withstand higher cutting speeds without compromising the surface quality or dimensional accuracy of the hole.

4. Improved Chip Control – Coolant helps to flush chips away from the cutting zone, preventing them from being recut and causing damage to the tool and the workpiece.

5. Reduced Environmental Impact – The use of coolant in drilling helps to reduce the amount of heat generated, thereby reducing the overall environmental impact of the process. It also helps to reduce the amount of oil and lubricants needed for machining.